"Which liner thickness should I use?" is a question every laminate dealer hears. The answer affects how the inside of the furniture looks, whether panels stay flat and what the job costs. This guide explains the three liner grades Bhavyam Laminates manufactures (0.72mm, 0.82mm and 0.92mm), where each one fits and how to advise carpenters and contractors at the counter.
What laminate thickness actually means
A high-pressure laminate is built from a decorative or plain surface paper on top of layers of resin-impregnated kraft paper, pressed together under heat and pressure. The thickness mainly depends on how many kraft layers go into the sheet. More layers make a thicker, stiffer sheet. Fewer layers make a thinner, more flexible one.
Three practical points for dealers:
- Thickness isn't the same as surface quality. A thicker sheet is more rigid and handles knocks better, but scratch resistance, stain resistance and finish depend mainly on the surface layer and how the sheet was made.
- Every grade has a tolerance. Ask your manufacturer for the tolerance on each grade, then check incoming sheets with a micrometer or vernier at several points.
- Thickness affects cost. Thicker sheets use more material, so they generally cost more. Choosing the right grade for each surface keeps quotes competitive without cutting corners where it matters.
0.72mm liner laminate: the everyday liner
The 0.72mm grade is the thinnest of the three and the most economical. It suits the large areas inside furniture that need a clean, sealed finish but see light use.
Typical uses: - Inner faces of wardrobes, kitchen cabinets and drawers - Shelves and carcass interiors - Storage units, shoe racks and bed boxes where cost matters - Backing sheets on smaller panels
Points to consider: Being the thinnest grade, it is the most flexible and the least resistant to impact of the three. On large shutters with a heavy face laminate, a thicker backer usually balances the panel better. Learn more in our guide to what liner laminate is and where it's used.
0.82mm liner laminate: the middle grade
The 0.82mm grade gives a little more body than 0.72mm without the cost of the thickest liner. It is a sensible all-round choice for jobs where carpenters want extra robustness inside the furniture.
Typical uses: - Wardrobe and cabinet interiors that see regular use - Inner faces of shutters, as the balancing sheet - Drawer bottoms and shelves that carry more load - Office storage, lockers and pedestal units
Points to consider: For most standard wardrobe and kitchen work, 0.82mm is a comfortable middle ground. Ask your customers how heavily the furniture will be used before recommending a grade.
0.92mm liner laminate: the heaviest liner
The 0.92mm grade is the thickest and stiffest of the three liner grades. Its extra body makes it the closest partner for thicker face laminates.
Typical uses: - Backer sheets on large or tall shutters carrying a thicker decorative face - Interiors that face heavy daily use, such as commercial and office storage - Jobs where the customer wants a sturdier feel inside the furniture
Points to consider: Thicker means more material and generally a higher price, so keep 0.92mm for the surfaces that need it. Liners in any grade aren't meant for tight bends. Curved edges need a laminate made specifically for postforming.
Quick comparison table
| 0.72mm | 0.82mm | 0.92mm | |
|---|---|---|---|
| Common role | Everyday liner | All-round liner / backer | Heavy-duty liner / backer |
| Typical surfaces | Interiors, shelves, drawers | Regular-use interiors, shutter backs | Large shutter backs, heavy-use interiors |
| Rigidity | Lowest | Medium | Highest of the three |
| Relative cost | Lowest | Medium | Highest of the three |
Use this as a general guide. The right grade also depends on the board, adhesive, pressing method, the face laminate used on the other side and how the furniture will be used.
Pairing liners with face laminates
Thickness also matters for balancing. When a laminate is pressed on only one face of a board, the panel can bow as humidity changes. A liner on the opposite face helps balance it.
Practical guidance for carpenters:
- Always laminate both faces of shutters and long, unsupported panels.
- Keep the pairing sensible. A face and back sheet that are close in thickness and behaviour balance better than a heavy face sheet with a very thin backer, especially on large shutters.
- Press both faces the same way, with the same adhesive and pressing method.
- Let the sheets and board acclimatise to the workshop before pressing, especially during the monsoon.
For more on pairing inner and outer sheets, see Liner vs decorative laminate: a guide for dealers.
Off-white and fabric liners
Bhavyam's liner laminates come in off-white and fabric designs. Off-white gives a clean, bright interior that suits almost any face design. Fabric liners add a soft woven look inside wardrobes and cabinets. Keep both at your counter so carpenters can choose the look that suits the job.
How dealers can stock the right mix
Your stock mix should follow what actually sells in your area, but a simple approach works for most dealers:
- Keep a steady stock of your fastest-moving liner grade in off-white. Liners go into almost every job.
- Stock the other grades selectively, based on what your carpenters and contractors regularly ask for.
- Add fabric liners for customers who want a more finished look inside.
- Label racks by grade and design, so sheets of different thicknesses don't get mixed up in the godown.
- Check incoming sheets for thickness, flatness and surface defects before they reach your customers.
Bhavyam Laminates manufactures off-white and fabric liner laminates in 0.72mm, 0.82mm and 0.92mm. Check our products and catalogue, and contact us for current availability by grade.
Frequently Asked Questions
Which liner laminate thicknesses does Bhavyam make?
Bhavyam Laminates manufactures liner laminates in 0.72mm, 0.82mm and 0.92mm, in off-white and fabric designs.
What is the difference between 0.72mm and 0.92mm liner laminate?
0.92mm liner has more kraft layers, so it is stiffer and better suited as a backer for large shutters and for heavy-use interiors. 0.72mm liner is lighter and more economical, and it suits everyday interiors, shelves and drawers.
Which liner thickness should I use on the back of a wardrobe shutter?
Pick a liner that pairs sensibly with the face laminate. For large shutters with a thicker decorative face, a heavier liner such as 0.82mm or 0.92mm usually balances the panel better than the thinnest grade.
Is thicker laminate more scratch resistant?
Not necessarily. Scratch and stain resistance depend mainly on the surface layer and how the sheet is made. Thickness mainly affects rigidity, impact resistance and how well the sheet hides unevenness in the board.
Can liner laminate be used on curved edges?
Liners are not meant for tight bends. Curved or rounded edges need a laminate made specifically for postforming.
Order 0.72mm, 0.82mm and 0.92mm liner laminates in bulk
Bhavyam Laminates Pvt Ltd manufactures laminates at Jathlana, Yamuna Nagar, Haryana, and supplies dealers, distributors and hardware traders in bulk across Haryana, Punjab, Uttar Pradesh, Delhi NCR, West Bengal and Jharkhand. We don't sell retail.
For grade-wise availability, shade cards or a bulk quote, contact our sales team:
- WhatsApp: +91 93552 25578
- WhatsApp: +91 98171 83438
- Website: www.bhavyamlaminates.com | Contact us